Multi functional led lighting device
The multifunctional LED lighting device can produce various lighting patterns according to the automation rules. Designed and developed some types of LED lighting devices for lighting a spot and a desktop. All of these devices embedded MCU can be controlled from remote by MQTT protocol via WiFi network. These devices are managed and controlled for switching ON/OFF or Dimming from not only Home Assistant WEB interface, but also the attached rotary encoder with a push button. The independent operation for switching ON/OFF and dimming under the disabled network condition could be possible. Multiple LED lighting devices arranged in the same space and set to the same MQTT topic could be controlled simultaneously from Home Assistant WEB interface or the rotary encoder of the arbitrary LED device.
Spot Type LED Lighting Device(3W)
Spot Type LED Lighting Device
The Spotlight LED lighting device with MAX 3W power consumption : white and warm coloured models are prepared. In addition to use it for a table lamp, etc., arranging multi these devices in the same space could produce the good atmosphere. By setting the rules in the home automation system, it is possible to extend functions such as a on/off scheduled timer and a blink at the time when the other sensor devices detected something. It is possible to operate independently under the disabled WiFi network. With portable battery unit(12V), it could be used under the situations such as a camp or a natural disaster.
Straight Type LED Lighting Device
The LED lighting device for lighting the desktop with MAX 8W power consumption : white and warm coloured models are prepared. By setting the rules in the home automation system, it is possible to extend functions such as a on/off scheduled timer and a blink at the time when the other sensor devices detected something. It is possible to operate independently under the disabled WiFi network.
Registration on WiFi Manager of Web Browser
Registration to WiFi, MQTT network is done from mobile or PC. At the first startup, you should access the device's WiFi Manager and enter the home WiFi access point, password, MQTT broker address (gateway address) , port and MQTT topic.
Network and MQTT Settings on WiFi Manager
ON/OFFă»Control Dimmingă»Lighting Patterns
You can control this LED device not only by the WEB interface on the mobile or PC, but also by the rotary encoder attached with this device. Multi LED lighting devices could be contorolled synchronously by setting the same MQTT topic for each. This LED device has maulti lighting patterns like flash, snooze, on/off and dimming, these lighting patterns would be used when the warning events occured. You could set the automation rules of the combination with these lighting pattern, and get various visual effects.
Display for Controlling LED devices